SmartPlus is a compact switchgear. It has extended mode also has the flexible insulation outlet way, in the same fluorocarbon gas in the gas chamber, most can configure 6 modules; configuration module is more than 6 of the switchgear to the extended bus will switch connected; can also through 9 functions of different modules can be formed by distribution scheme simple to complex, meet two substation and switch configuration requirements in the. The compact unit forms are C, De, D, F, V, SL, SVBR, Be, M, CB.
Compact structure: with the development of urban construction and industry, land resources are becoming more and more valuable. Smart series ring network cabinet is compact and small in size. It can be used in any place to save land resources. All the modules except 325mm circuit breaker CB cabinet and air insulation gauge cabinet are only 325mm wide, the width of the measuring cabinet is 696mm, and the CB cabinet has three widths, which are 446/500/696mm wide. The cable connection casing of all units is the same to the ground, which facilitates site construction.
It is not affected by the environment: all the high voltage charged parts are located in the stainless steel box, the case is made of stainless steel seal and filled with fluorocarbon gas with working pressure of 1.4bar, the protection level is IP67. It can be installed in damp, dusty, dusty, salt polluted, mining, box type substations, and any place where air pollution can cause surface pollution flashover without any special precautions. No busbar cleaning and small animals are not needed. Even the fusing chamber has a protective grade of IP67. The extended busbar is completely insulated and shielded to ensure that it is not affected by the change of the external environment and is not maintained.
Smart is an intelligent switch IRMU integrated with industrial automation technology: it can provide effective protection, remote control and monitoring system, and provide plug and play distribution automation RTU factory solution. No external control box is needed. All electronic components, batteries and modem are installed in a special space behind the standard panel of the switch.
Environmental protection: the development of this product is not only from the product itself, but also the environmental protection of the whole life of the switch from the production process to the switch. Our company selects environmentally friendly materials, and uses zero leakage cleaning process to seal products for life. After the end of life cycle, 90%-95% materials can be recycled.
The development of the Smart series switches follows the IEC298 standard. Under indoor conditions (20 degrees centigrade), the design life is more than 30 years. (IEC298 appendix GG).